Shihlin electric SDP Series, Manual

Page: 211 / 555

198
is set to -500, the analog voltage of MOD can be corrected to the same value as the actual
voltage. If the analog voltage of MOD is smaller than the actual voltage, please input a positive
value in PC28 or PC29.
Analog monitor output ratio
The analog monitor output ratio is used to set the resolution of the analog monitor voltage
output. The relevant parameters are as follows:
Name
Parameter
abbreviation
Parameter
code
Setting
range
Description Unit
Default
value
Control
mode
MON1
analog
monitor
output
ratio
MOG1 PC30 1~100
Set the
maximum
ratio of analog
monitor 1
output
% 100 ALL
MON2
analog
monitor
output
ratio
MOG2 PC31 1~100
Set the
maximum
ratio of analog
monitor 2
output
% 100 ALL
Assuming that the rated speed of the motor is ±3000 rpm, and the current speed of the motor
is +3000 rpm, the voltage observed by the MON should be +5V. If MOG1 or MOG2 is set to
50%, the analog voltage observed by the MON will 10V.
MOD output voltage= current monitoring value/ maximum monitoring value * 10V / MOG.
The unit of MOG1 and MOG2 are %.