Shihlin electric SDP Series, Manual

Page: 114 / 555

101
Button description is as follows:
Button Content
“UP”
Press and hold UP button to run in
CCW direction. Release it to stop.
“DOWN”
Press and hold DOWN button to
run in CW direction. Release it to
stop.
(2)
Status display
To verify the SERVO status during JOG operation.
When JOG operation is ready, if you press the MODE button, the status screen will be
displayed. You can press UP/DOWN button to execute JOG. Pressing MODE button once
will display the next screen and the screen will switch back to JOG operation screen after
one cycle. Refer to section 4. 3 for status display details.
In JOG operation mode, the UP/Down button cannot change status display.
(3)
JOG operation completion
During JOG operation, you can turn off the power once or press and hold the SET button in
the test operation screen for more than 2 seconds to exit the JOG operation,
Please refer to the description of step 3 in section 5.2.1 to understand how to use Shihlin
servo PC software to operate the JOG function.
4.6.4 Positioning test operation

Before using the positioning test operation, the servo should connect to the Shihlin
communication software via RS-485 or USB.

Positioning test operation can be performed only when there is no external
command and no alarm occurs.

Ensure SON is OFF during test.