Shihlin electric SDP Series, Manual

Page: 308 / 555

295
No Abbr. Parameter function and description Mode Default Range Unit
PC12 VCM
(▲)
Maximum motor speed for analog speed command
Set the motor speed corresponding to 10V
(maximum voltage) for the analog speed command.
Speed mode:
Speed control command = Setting value*input
voltage/10.
Example:
If the setting value is 2000 and the external voltage
input is 10V, then the speed control command is
2000 rpm. If external voltage input is 5V, then the
speed control command is 1000rpm.
Torque mode:
Speed limit value = Setting value*input voltage / 10
This parameter setting indicates the speed limit
value corresponding to maximum voltage.
S 3000
0
~
30000
rpm
mm/s
T 3000
0
~
30000
rpm
mm/s
PC13 TLC
(▲)
Maximum output of analog torque command:
Set the torque corresponding to 10V (maximum
voltage) for the analog torque command.
Torque mode:
Torque command= input voltage / 10* setting value
Example:
If setting value is 100 and the external voltage input
is 10V, then the torque control command is 100% of
the maximum torque. If the external voltage input is
5V, then the torque control command is 50% of the
maximum torque.
Position and speed mode:
PC13 can set as torque limit in position and speed
mode, you can refer to section 6.3.4 for detail.
T 100
0
~
2000
%
Pr,
Pt,
S
100
0
~
2000
%