85
4. Panel display and operation
This chapter describes the panel display of Shihlin Servo Drive and its operation instructions.
4.1. Panel description
Display
MODE key
UP key
Charge LED indicator
SET Key
Down key
Name
Function
Display
5-digit, 7-segment LED displays the monitoring values,
parameter numbers, setting values, etc.
MODE key
It switches the display among monitoring mode, parameter
mode, and alarm mode. When writing parameter, this key is use
as shift function.
UP key
scroll up the parameter code or setting value.
Down key
scroll down the parameter code or setting value.
SET Key
displays and stores the parameter setting value.
Charge LED
indicator
The Charge LED indicator is on when the power is applied to the
circuit.
Summary of Contents for SDP Series
