Shihlin electric SDP Series, Manual

Page: 359 / 555

346
No. Abbr. Parameter function and description Mode Default Range Unit
PD01 DIA1
(*)
Input signal automatic ON option
u (EMG) z (LSN) y (LSP) x (SON)
x=0: the open/short status of SON-SG is controlled
by the external circuit of the drive.
x=1: SON-SG is auto short-circuited internally
without external wiring.
y=0: the open/short status of LSP-SG is controlled by
the external circuit of the drive.
y=1: LSP-SG is auto short-circuited internally without
external wiring.
z=0: the open/short status of LSN-SG is controlled by
the external circuit of the drive.
z=1: LSN-SG is auto short-circuited internally without
external wiring.
u=0: the open/short status of EMG-SG is controlled
by the external circuit of the drive.
u=1: EMG-SG is short-circuited internally without
external wiring.
All 0000h
0000h
~
1111h
N/A
PD02 DI1
(*)
Input signal option 1:
To define the function of CN1-14 pin input signal.
In different control modes, the input signals are not
exactly the same. The user can define CN1-14 input
signal in different control mode by setting PD02.
All 0001h
0000h
~
002Fh
N/A
PD03 DI2
(*)
Input signal option 2
To define the function of CN1-15 pin input signal.
CN1-15 can be assigned for any input signal, its
parameter setting is same as PD02, you can refer to
PD02 setting description.
All 000Dh
0000h
~
002Fh
N/A