Shihlin electric SDP Series, Manual

Page: 324 / 555

311
No Abbr. Parameter function and description Mode Default Range Unit
PC55 CPEX Capture/Compare additional function setting:
0 z y x
x: CAP other functions
x=1: when the CAP is completed, it will not be
turned off, however, it will be performed the next
cycle operation automatically, and the data
captured by the CAP will still be saved in PC41!
y: synchronous capture axis status(read only)
y=1: DI7 triggers too many times (10 times) when
the synchronous capture axis is activated
z: CMP other function
z=1: PC52 automatically resets to 0 once PC52 is
valid, otherwise PC52 keeps the value.
All 0000h
0h
~
0111h
N/A
PC56 CSDS Pulse error for synchronous Capture axis:
When the synchronous Capture axis is operating,
the pulse error should be 0.
Each time when capturing data, the synchronous
axis operates and this parameter updates once. It
operates as follows:
PC56 = incremental pulse amount between two
capturing actions - interval pulse number between
each synchronous Capture action (PC54)
PC56 = PC53 accumulation – (PC54 * number of
capturing times)
You can also write the specified offset of the
synchronous axis to this parameter.
When the synchronous Capture axis is used for the
rotary shear, modifying this parameter can shift the
cutting position to the left or right. You can also use
error offset compensation for synchronous Capture
axis(PC58) to achieve this effect.
Pr 0
-
21474
83648
~
21474
83647
Pulse
unit of
master
axis