Shihlin electric SDP Series, Manual

Page: 550 / 555

537
14.4 Compliance with global standards
14.4.1. Safety instructions
Before installing this equipment, please read this manual carefully to ensure use it correctly.
This section explains the safety regulations for users and equipment operation.
To avoid the possibility of electric shock, please turn off the power for more than 20 minutes
until the charging indicator is off and the voltage test is confirmed, and then It can be wired or
inspected, otherwise it may cause electric shock.
14.4.2.
Professional technicians.
Only the professional technician who has received professional training can install the SDP
servo drive.
14.4.3.
Compliance with standards
(1) Safety regulations
SDP general type servo drive complies with IEC/EN61800-5-1 standards.
(2)
Compliance with EU standards
SDP general type servo complies with EMC directive(2014/30/EU) and low voltage
directive(2014/35/EU).
(3)
Compliance with USA/Canada regulations
This servo drive design complies with UL 508C and CSA C22.2 No.274-13
(a)
Installation
The minimum size of the distribution box should be 200% the size of the SDP servo
drive. For ventilation of the fan and to keep the ambient temperature below 55°C, only
copper wires can be used for wiring. The servo drive should be installed in a metal
distribution box.
(b)
Overload protection feature