Shihlin electric SDP Series, Manual

Page: 24 / 555

11
2. Installation
2.1. Preca
utions and storage

Do not install the product in the location with or nearby inflammable objects.

Do not over tighten the cable between the drive and the motor.

Do not place any heavy objects on the top of the drive.

Be sure to fasten every screw tightly when fixing the drive.

Install the drive at a location with proper weight capacity.

The motor shaft must be aligned with the shaft of the equipment.

Never let below items go inside of the servo drive. Including: conductive matter: such as
screw, metal parts, etc, and flammable matter, such as oil, etc.

Upgrade the diameter of cable which connect the U/V/W connector and the encoder if the
distance between the drive and the motor is over 20meters.

Do not congest vent of the drive, otherwise breakdown may be occurred.

Do not drop or strike the drive.

Do not try to operate the drive if something has been damaged.

Refer to section 10.1 and 11.3 for drive and motor storage precautions.
2.2. Installation environment
The applicable ambient temperature for Shihlin drive is between 0
℃
and 55
℃
. If it exceeds
45
℃
, please place the drive in a well-ventilated or air-conditioned room . It is recommended to
keep the ambient temperature below 45
℃
for long-term operation to ensure the reliable
performance of the product. If this product is installed in a distribution box, check the size of the
distribution box and its ventilation condition, make sure the internal electrical devices has no
overheating risk,
Besides, check if the vibration of the machine affects the electrical devices of
the distribution box.
In addition, the conditions for using Shihlin servo include the following: