Shihlin electric SDP Series, Manual

Page: 345 / 555

332
No Abbr. Parameter function and description
PC88 CSDS
Command
code 0008h
E-Cam curve scaling (PC96) is effective once immediately
Macro
parameter
N/A
1. If this macro is triggered, the E-Cam scaling (PC96) becomes effective once
immediately when the E-Cam is engaged.
2. The E-Cam scaling is loaded into the system by PC96 at the point when E-Cam
is engaged (see the following transition 3). The scaling cannot be changed when
E-Cam is engaged, it can only be changed after one cycle is finished which is to
ensure the E-Cam can return to the original position without cumulative error.
Pre-engaged
Stop Engaged
Load in E-Cam scaling
PC96
前置 Pre-engaged
停止 Stop
载入凸轮倍率 Load in E-Cam scaling
嚙合 Engaged
If it is necessary to change the E-Cam scaling immediately in the application, there
are two methods in below:
1. Set PC66x.Bit2=1: set this bit when E-Cam is engaged, so that every change to
the PC96 takes effect immediately.
2. Execute macro#8: each time macro#8 is triggered, it will activate PC96
immediately.
Failure code N/A
Success code
1008h
-