Shihlin electric SDP Series, Manual

Page: 15 / 555

2
(1)
A servo drive and a servo motor.
(2)
A UVW motor power cable: its one end with the U, V, W cables connect to the
corresponding terminal block, and the other end connects to the UVW connector on the
motor. The green wire connects to the ground terminal of the servo drive (optional
purchase).
(3)
An encoder control signal cable: its one end connects to the CN2 of the servo drive and
the other end to encoder.
(4)
A USB communication cable, its one end connects to CN4 of the drive, the other end to
USB port of the computer. (Optional purchase).
(5)
A 50 Pin connector for CN1.
(6)
A 12 pin (P,D,C,N,L1,L2,R,S,T,U,V,W) terminal block for servo below 1KW.
(7)
A 6 pin(P,D,C,N,L1,L2) terminal block for1.5KW~3KW servo.
(8)
A 6 pin (R,S,T,U,V,W) terminal block for 1.5KW~3KW servo.
(9)
An installation guide.
(10)
Shihlin servo user manual, the electric copy can be download from the website.
1.3 Product model overview
1.3.1 Servo motor model naming rule
1.
Naming rule
S M E -
(8)Keyway an d o utle t type
(7)Brake and oil seal
(6)Encoder type
(5)Rated speed
(4)Motor capacity
(3)Inertia type
(2)Model name
(1)
Servo motor code
(9)Safety certification
2.Description of each code item
(1)
Servo motor code: SM indicates servo motor.
(2)
Model code: E(200V), P(400V).