Shihlin electric SDP Series, Manual

Page: 320 / 555

307
No Abbr. Parameter function and description Mode Default Range Unit
PC45 CPRS Capture: reset position after first data captured
Please refer to PC44x. Bit1 description.
Note: pay attention to upper limit of the maximum
and minimum values when setting this parameter.
All 0
-
10737
41823
~
10737
41823
Source
pulse
PC46 CPMK Capture: masking range
When capturing multiple points (PC43>1), once one
data is captured, the system stops(masking) range
definition is as follows.
(the last capture data source position ± PC46 is set
as masking area)
All 0
0
~
1000
000
Source
pulse
PC47 CMST Compare: start address of data array:
The first data to be compared is saved at start
address in the data array.
Note: this parameter is only writable when CMP
turned off(PC50x.Bit = 0).
All 0
0
~
799
N/A
PC48 CMAX
(■)
Compare: axis position:
This parameter displays the axis position of the
CMP pulse source.
Note1: this parameter is only writable when CMP
stops (PC50 x.Bit = 0).
Note 2: this parameter is write-protected when the
axis source of Compare is the Capture axis(PC50 y
= 0).
Note3: when the axis source of Compare is main
encoder(PC50 Y=2), this parameter is also write-
protected. When you set PC50 Y=2, this parameter
is reset to the feedback position of the motor. When
the motor feedback position is redefined due to
homing or Capture, the value will be different from
All 0
-2 31 +1
~
2 31 -1
Source
pulse