Shihlin electric SDP Series, Manual

Page: 223 / 555

210
DLY: the value range is 0~F which can be set as delay time number, and its definition is as
follows:
DLY value F E D C B … 4 3 2 1 0
Corresponding
parameters
PF80 PF79 PF78 PF77 PF76 … PF69 PF68 PF67 PF66 PF65
Program jump: when TYPE=7, it can jump to the specified PR program number. (Take
PATH#01 as an example)
31~28 27~24 23~20 19~16 15~12 11~8 7~4 3~0 BIT
PE03 x x DLY x x x OPT 7
PE04 PATH_NO: specified PR program number, range(1~63), if set to 0, it stops.
PATH_NO: jump target program number.
The definition of OPT option is as follows:
OPT option
Bit 7
(0/8)
Bit 6
(0/4)
Bit 5
(0/2)
Bit 4
(0/1)
x x x
INS
(interrupts)
INS: if set as INS, it means the current PR will interrupt the previous PR.
DLY: the value range is 0~F which can be set as delay time number, and its definition is as
follows:
DLY value F E D C B … 4 3 2 1 0
Corresponding
parameters
PF80 PF79 PF78 PF77 PF76 … PF69 PF68 PF67 PF66 PF65
Parameter writing: when TYPE=8, it enable to write specified parameter(take PATH#01 for
example) .
31~28 27~24 23~20 19~16 15~12 11~8 7~4 3~0 BIT
PE03 x SOUR DLY Target writing parameter OPT 8
PE04 Source (constant value or parameter number)