Shihlin electric SDP Series, Manual

Page: 18 / 555

5
1.3.2 Servo drive model naming rule
1. Naming rule
S D P - ○○○ △△ □
(1)
Model code
(2)
Power type
(3)
Drive capacity
(4)
Product series
(5)
Drive code
2.Description of each coding item
(1)
Drive code: SD means Servo Drive
(2)
Product series: P
(3)
Drive capacity: motor output power. Multiply the motor output power by 1/10 and then
indicate it as a three-code number. For models above 1000W, the third code uses the
English letter K to represent 1000W. The example is as follows:
020 means 200W
150 means 1500W
300 means 3000W…like that.
(4)
Power type: input power specification
A2: single-phase or three-phase 200 ~ 240 VAC
A4: three-phase 380 ~ 480 VAC
(5)
Mode code
A: without full-closed loop. (CN2L)
C: with full-closed loop. (CN2L)
Example:
Example (1): A 200W drive, single-phase or three-phase 200 ~ 240 VAC, with full-closed loop
control function, the code is as follows: SDP-020A2C.
Example (2): A 3000W drive, three-phase 400 ~ 480 VAC, with full-closed loop control function,
the code is as follows: SDP-300A4C.