Shihlin electric SDP Series, Manual

Page: 3 / 555

iii
Turn off the servo drive power when problem occurs, otherwise, the high current flow may
cause fire disaster.
Turn off the power by regenerative abnormal signal when regenerative resistor is used. If
there is a regenerative brake transistor fault, which may make the regenerative resistor
overheat and may cause fire disaster.
Never let below items go inside of the servo drive or motor. Including: flammable matter,
such as oil, fat, etc. And conductive matter: such as screw, metal parts, etc.
Ensure the servo drive power supply is connected with a non-fuse breaker.
3. Injury Prevention
Do NOT apply voltages other than those specified in the specifications to each terminal,
otherwise, a burst or damage may occur.
Do NOT make mistake when wiring to the terminal. Otherwise, a burst or damage may
occur.
Do NOT make mistake on the(+ -)polarity. otherwise, a burst or damage may occur.
Do NOT touch the heat sink, regenerative resistor of the servo drive, servo motor and other
components during operation or soon after the power just turned off, because it may get hot
and cause injury.
4. Other cautions
Please pay attention to below notifications, improper operation may cause breakdown, injury ,
electric shock, etc.
(1)
Delivery & Installation
Choose correct way to deliver the product base on its weight.