Shihlin electric SDP Series, Manual

Page: 325 / 555

312
PC57 CSDS Maximum correction rate for synchronous Capture
axis:
This parameter limits the correction percentage (%)
of the synchronous Capture axis.
Correction rate = Pulse number output by the
synchronous axis / Pulse number input by the
synchronous axis.
(100 – PC57)%
＜
Correction rate
＜
(100 +
PC57)%
Correction
rate
Synchronous
error
Speed
change
Bigger
faster falls to
0
drastic
Smaller
slower downs
to 0
smoother
When PC57 used in rotary shear, after synchronous
deviation of PC56 is adjusted, increasing PC57
setting will adjust the cutting spot to the target
position quickly, but the speed synchronize will be
worse.
Pr 10
0
~
90
%
PC58 CSOF Error offset compensation for synchronous Capture
axis:
When the synchronous Capture axis is enabled and
you want to change the error pulse amount (PC56),
you can use this parameter to write the offset value.
Write PC58: output PC56 = PC56 after Write
value
Read PC58: read value = PC56.
Pr 0
-32768
~
32767
Pulse
unit of
master
axis
PC59 ECHD E-Cam: start address of data array:
The first data of E-Cam data array is saved at start
address in the data array.
This parameter is only effective at the moment of
pre-engaged to engaged!
Pr 100
0
~
794
N/A