Shihlin electric SDP Series, Manual

Page: 333 / 555

320
numbers is not stored in PR.
dc: masking range (%)
When DI:ALGN is triggered, the next alignment
action is allowed only after the increasing pulses
of the master axis are greater than the masking
distance (M). M ≥ (PC62/PC61) x PC79.dc%.
Note: this masking function only allows forward pulse
input and does not work for reverse pulse input.
PC80 ALDY E-Cam alignment: DI delay time setting:
This parameter offsets the alignment target to
resolve DI and sensor delays. The setting works as
follows: PC80 = PD15 (DI response filter time) +
delay time of sensor.
Pr 0
-25000
~
25000
us
PC81 ALTG E-Cam alignment: alignment target position:
When the input value is out of range, the writing is
prohibited and error occurs.
When the input value is within the setting range, but
if changes in the value of PC62 or PC61 causes the
value to exceed the range, this parameter is
automatically reset to 0:
PC81 new value = 0 if PC81
≧
(PC62 /PC61)
Pr 0
0
~
(PC62
/PC61)
-1
Pulse
unit of
master
axis
No Abbr. Parameter function and description Mode Default Range Unit