Shihlin electric SDP Series, Manual

Page: 327 / 555

314
PC65 PLED1 E-Cam: initial lead pulse before engaged:
When the condition to engage E-Cam (PC66z) is
met, the pulse number from the master axis has to
exceed the value of this parameter for the E-Cam to
fully engage. The pulse from the master axis will be
neglected if the initial lead pulse is not reached.
Parameter with + sign: need to receive forward pulse
as lead pulse.
Parameter with – sign: need to receive reverse pulse
as lead pulse.
This parameter can be written with the virtual master
axis pulse function(refer to PC83)
Pr 0
-2
30
+1
~
2 30 -1
Pulse
unit of
master
axis
PC66 ECON
(■)
E-Cam
:
activate E-Cam control:
d 0 b a u z y x
x: E-Cam function
x.bit2 x.bit1 x.bit0
x.Bit0 = 1: E-Cam is enabled.
Note: this parameter is only writable when E-Cam
stops.
x.Bit1
0: when the servo is off, the alarm occurs or Pr is
performing homing, the E-Cam is disengages.
1: when the servo is off or alarm occurs, the E-Cam
remains engaged. When the servo switches to on,
or some big alarm is cleared, E-Cam can operate
directly.
x
.Bit2
0: modified PC96 is effective in next engagement
1: modified PC96 is effective immediately
y: command source
y=0: Capture axis
Pr 0h
0h
~
203F
F267h
N/A