Shihlin electric SDP Series, Manual

Page: 123 / 555

110
⚫
Hex parameter reading and writing method
For example, PE01 = 0x03760135, you can follow below steps to change the parameter value
to 0x03740135
Press SET button once
Show low 16-bit data, and the lighting rightmost low
bottom line means the low word data is displaying
Press MODE button once
Show high 16 bit data, the lighting leftmost upper line
means the high word data is displaying
Press MODE button once
The screen back to low word data
Press SET button once
The rightmost 7-segment LED flicks. You can
press UP or Down button to modify the data
Press MODE button 4 times
Press DOWN button twice
Press SET button once to enable the write-in parameter