QNAP QTS 4.5 Series User Manual Download Page 310

Page: 310 / 575

The

Edit LUN Mapping

window opens.

Select

Map to iSCSI target

Select an iSCSI target.

Optional: Select

Enable LUN

If selected, QTS will enable the LUN after mapping it to the target.

Click

iSCSI LUN Actions

LUN Action

Description

Disable

Disable the LUN. The LUN will become inaccessible
to connected iSCSI initiators.

Enable

Enable the LUN if it is currently disabled.

Modify

Edit the LUN settings.

Delete

Delete the LUN and all data stored on it.

Important

• This action is only available if the

LUN is unmapped.

• To delete a VJBOD Cloud LUN, use

the VJBOD Cloud app.

Edit LUN Mapping

Unmap the LUN, or map it to a different iSCSI target
or Fibre Channel Port group.
For details, see the following topics:

•

Mapping a LUN to a Fibre Channel Port Group

•

Mapping a LUN to an iSCSI Target

Show in Storage & Snapshots

Manage the LUN at

Storage & Snapshots

Storage

Storage/Snapshots

LUN Import/Export

Export the LUN to another server, a local NAS folder,
or an external storage device.
For details, see

LUN Import/Export

iSCSI LUN Status

Status

Description

Enabled

The LUN is active and visible to connected initiators.

Disabled

The LUN is inactive and invisible to connected
initiators.

iSCSI Targets

Creating an iSCSI Target

Go to

iSCSI & Fibre Channel

iSCSI

iSCSI Storage

Click

Create

, and then select

New iSCSI Target

QTS 4.5.x User Guide

iSCSI & Fibre Channel

309

Summary of Contents for QTS 4.5 Series
































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for QTS 4.5 Series

Reviews:

Related manuals for QTS 4.5 Series

Brands by name

Popular brands

QNAP QTS 4.5 Series, User Manual

Search results

Summary of Contents for QTS 4.5 Series

Reviews:

Related manuals for QTS 4.5 Series

Brands by name

Popular brands