8.
Optional: Specify a port.
Tip
The default port is 22.
9.
Click
Test
.
QTS connects to the destination NAS using the specified admin password, and checks that there is
sufficient storage space.
10.
Click
Next
.
11.
Specify how many replicated snapshots will be kept on the destination NAS.
After the specified number is reached, QTS will delete the oldest snapshot each time it replicates a new
snapshot.
12.
Select the destination storage pool.
13.
Click
Next
.
14.
Select a backup plan.
Backup Plan
Description
Start replication job after taking a local snapshot
The replica job will run each time QTS creates the
specified number of snapshots. These snapshots
may be created manually or on a schedule.
Start replication job on a schedule
The replica job runs according to the specified
schedule, and replicates all snapshots created since
it was last run. If no new snapshots were created, it
will not replicate any data.
Choose one of the following scheduling options, and
then click
Add
.
• Run on a schedule: The job automatically runs
daily, weekly, or monthly. Settings:
• Schedule: How often the job runs
• Day: The day that the job runs on
• Expiration date: The replica job stops
running after this date
• Frequency: How often the job runs on the
days specified by "Schedule" and "Day"
• Start at: The time that the job starts running.
• Run once: The job runs once on a specific time
and day.
• Manually start: The job does not run unless a
user starts it.
QTS 4.5.x User Guide
Storage & Snapshots
257
