QNAP QTS 4.5 Series User Manual Download Page 304

Page: 304 / 575

QTS LUN Types

QTS supports the following types of LUN.

Tip

Block-based LUNs support more features and have faster read/write speeds. QNAP
recommends using block-based LUNs over file-based LUNs if possible.

Feature

Block-based LUN

File-based LUN

VJBOD Cloud LUN

Parent storage space

Storage pool

Thick volume

Cloud space

VAAI Full Copy

Supported

VAAI Block Zeroing

Supported

VAAI Hardware-Assisted
Locking

Supported

VAAI Thin Provisioning
and Space Reclaim

Supported

Not supported

Supported

Thin provisioning

Supported

Not supported

QTS space reclamation

Supported (when using
VAAI or the host is
Windows Server 2012,
Windows 8 or later)

Not supported

Supported (when using
VAAI or the host is
Windows Server 2012,
Windows 8 or later)

Microsoft ODX

Supported

Not supported

Supported

LUN export

Supported

LUN snapshots

Supported

Partially supported (You
can take a snapshot of
the LUN's parent
volume.)

Supported

Read/write speeds

High

Medium to low

High when using caching
(stored space)
Low when not using
caching

Creating a Block-Based LUN

Go to one of the following screens.

•

iSCSI & Fibre Channel

iSCSI

iSCSI Storage

•

iSCSI & Fibre Channel

Fibre Channel

FC Storage

Click

Create

, and then select

New Block-Based LUN

The

Block-Based LUN Creation Wizard

opens.

Select the storage pool that this LUN will be created in.

Select a LUN allocation method.

Allocation

Description

Thick instant allocation

QTS allocates storage pool space when creating the
LUN. This space is guaranteed to be available later.

QTS 4.5.x User Guide

iSCSI & Fibre Channel

303

Summary of Contents for QTS 4.5 Series
































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for QTS 4.5 Series

Reviews:

Related manuals for QTS 4.5 Series

Brands by name

Popular brands

QNAP QTS 4.5 Series, User Manual

Search results

Summary of Contents for QTS 4.5 Series

Reviews:

Related manuals for QTS 4.5 Series

Brands by name

Popular brands