QNAP QTS 4.5 Series User Manual Download Page 175

Page: 175 / 575

Disk Management

You can manage disks at

Storage & Snapshots

Storage

Disks/VJBOD

. Select a disk to view its status

and hardware details.

Disk Status

Status

Description

Data

The disk is being used for data storage.

Spare

The disk is configured as a hot spare.

Free

The disk is not in use.

Cache

The disk is being used in the SSD cache.

None

There is no disk in the drive bay.

Warning

QTS has detected S.M.A.R.T. errors. Run a full S.M.A.R.T. test and a disk scan.

Error

QTS has detected I/O errors. You must replace the disk immediately.

Safely
Detached

The disk's storage pool or expansion unit was safely detached from the NAS.

Disk Information

Information

Description

Disk Health Status

The general health status of the disk

• Good: The disk is healthy.

• Warning: QTS has detected an error. Run a full S.M.A.R.T.

test and a disk scan.

• Error: QTS has detected a critical error. You must replace the

disk immediately.

Manufacturer

The manufacturer of the disk

QTS 4.5.x User Guide

Storage & Snapshots

174

Summary of Contents for QTS 4.5 Series
































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for QTS 4.5 Series

Reviews:

Related manuals for QTS 4.5 Series

Brands by name

Popular brands

QNAP QTS 4.5 Series, User Manual

Search results

Summary of Contents for QTS 4.5 Series

Reviews:

Related manuals for QTS 4.5 Series

Brands by name

Popular brands