QTS supports three different virtual switch modes.
Mode
Description
Basic
This mode is well-suited for most users, and requires
minimal configuration of network settings.
Advanced
This mode is best-suited for power-users who need
more control over the configuration of network
settings.
Software-Defined Switch
This mode is suited for power-users who need to
simulate an L2 physical switch.
Important
Packet forwarding rates are limited
when using this mode.
Tip
To access this page, Network & Virtual Switch must be operating in
.
Creating a Virtual Switch in Basic Mode
1.
Go to
Control Panel
>
Network & File Services
>
Network & Virtual Switch
.
The
Network & Virtual Switch
window opens.
2.
Go to
Network
>
Virtual Switch
.
3.
Click
Add
.
The
Create a Virtual Switch
window opens.
4.
Select
Basic Mode
.
QTS 4.5.x User Guide
Network & Virtual Switch
425
