QNAP QTS 4.5 Series User Manual Download Page 79

Page: 79 / 575

Specify the following information:

Field

Description

Folder Name

Specify a folder name that contains 1 to 64 characters and that does
not:

• Begin or end with a space

• Contain consecutive spaces

• End with "."

• Begin with "_sn_" or "_sn_bk"

• Contain the following characters: " + = / \ : | * ? < > ; [ ] % ` '.

Comment (optional)

Specify a comment that contains 1 to 128 ASCII characters.

Storage Pool

Specify the storage pool where the shared folder will be created.

Space Allocation

Select one of the following space allocation options:

•

Thick provisioning

•

Thin provisioning

Qtier Auto Tiering

When enabled, Qtier performs auto-tiering on data in the folder.
This setting is only available if you select a Qtier-enabled storage pool.

Tip

You can also enable auto-tiering from the

Shared

Folders

screen.

Allocate folder quota

You can allocate a folder quota for the snapshot shared folder.

Optional: Configure user access permissions.

Under

Configure access privileges for users

, click

Edit

Specify the access permissions for users.
For details, see

Shared Folder Permissions

Optional: Configure advanced settings.
For details, see

Creating a Shared Folder

Click

Create

Migrating to a Snapshot Shared Folder

Go to

Control Panel

Privilege

Shared Folders

Shared Folder

Select the folder you want to migrate to a snapshot shared folder.

Click

Migrate to Snapshot Shared Folder

The

Migrating shared folder to a snapshot shared folder

wizard appears.

Select the location for the snapshot shared folder.

Click

Next

Optional: Free up storage pool space on the volume.

QTS 4.5.x User Guide

Privilege Settings

Summary of Contents for QTS 4.5 Series
































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for QTS 4.5 Series

Reviews:

Related manuals for QTS 4.5 Series

Brands by name

Popular brands

QNAP QTS 4.5 Series, User Manual

Search results

Summary of Contents for QTS 4.5 Series

Reviews:

Related manuals for QTS 4.5 Series

Brands by name

Popular brands