manualshive.com logo in svg

QNAP QTS 4.5 Series, User Manual, Page: 366 / 575

Share
Download
QNAP QTS 4.5 Series User Manual Download Page 366

Method

Description

File Size

Only includes files within a specified size range

Modification date

Only includes files modified within a specified date
range

Last modified

Only includes files modified within a specified
number of days

Included file types

Only includes files of the specified type

Tip

When selecting 

Other

, specify specific

file names or file types. Separate entries
with a comma. Use * for wildcard
entries. [abc.doc, *.html, test*.*]

Excluded file types

Excludes all files of the specified type

Tip

When selecting 

Other

, specify specific

file names or file types. Separate entries
with a comma. Use * for wildcard
entries. [abc.doc, *.html, test*.*]

e.

Click 

OK

.

f.

Configure the advanced settings. 

Setting

Description

Use data compression

Compresses data to reduce backup sizes and
improve transfer speeds & storage efficiency

1.

Click 

Settings

.

The 

Compression Settings

 window opens.

2.

Specify any excluded files types.
Separate entries with a comma

3.

Specify a file size limit.
Files smaller than the limit are not compressed

4.

Select a compression ratio.

Tip

Data is compressed using bzip. After
compression, the data must be
decompressed before it can be used.

14.

Configure the job policies. 
Some policies are only available with certain destination types.

a.

Click 

Policies

. 

QTS 4.5.x User Guide

Hybrid Backup Sync   

365

Summary of Contents for QTS 4.5 Series
































































































































































































































































































































































































































































































































































































Reviews:

No comments