Task
Steps
Specify the priority of rules
a.
Select a display style.
b.
Select a rule from the list.
c.
Beside
Priority
, click
or to change its
priority.
Note
The formatting results of rules with a
higher priority overwrite those with a
lower priority.
Removing Event Indicators
1.
Open QuLog Center.
2.
Go to
Local device
>
Log Settings
>
Event Indicators
.
3.
Select an event flag rule.
Tip
Click the box in the top left column to select all event flag rules.
4.
Click
Remove
or
.
The event flag rule is removed.
QuLog Service
Log Sender
The Log Sender allows you to send system event logs and system access logs on the local device to a
remote QuLog Center.
Adding a Destination IP Address
1.
Open QuLog Center.
2.
Select one of the following options:
Options
Steps
Send to QuLog Center
a.
Go to
QuLog Service
>
Log Sender
>
Send to
QuLog Center
.
b.
Enable
Send logs to remote QuLog Center
.
System event logs and access logs from the
local device are sent to a remote QuLog Center.
Send to Syslog Server
a.
Go to
QuLog Service
>
Log Sender
>
Send to
Syslog Server
.
b.
Enable
Send logs to remote syslog server
.
System event logs and access logs from the
local device are sent to a remote syslog server.
3.
Click
Add Destination
.
QTS 4.5.x User Guide
QuLog Center
521
