manualshive.com logo in svg

QNAP QTS 4.5 Series, User Manual, Page: 416 / 575

Share
Download
QNAP QTS 4.5 Series User Manual Download Page 416

Setting

Description

Connect even if hidden

Attempt to connect to this network even if the SSID
is hidden.

8.

Click 

Apply

Connecting to a Captive-Portal-Enabled Wireless Network Using Browser Station

Captive portal allows organizations to easily share their network environment with customers, employees,
and other guests.

QTS supports the captive portal function that connects to the internet through an access point in the wireless
network.

Note

Download and install Browser Station from App Center to access the captive portal
functions.
Alternatively, QNAP recommends installing Qfinder Pro(6.9.2 or later) to utilize the captive
portal function on a wireless network.
For details, see 

Connecting to a Captive-Portal-Enabled Wireless Network Using Qfinder

Pro

.

1.

Go to 

Control Panel

 > 

Network & Virtual Switch

 . 

The 

Network & Virtual Switch

 window opens.

2.

Go to 

Network

 > 

Interfaces

 .

3.

Go to the 

Wi-Fi

 tab.

4.

Optional: Click 

Scan

 to search for accessible wireless networks enabled with captive portal. 

5.

Select the captive-portal-enabled wireless network from the list. 

QTS 4.5.x User Guide

Network & Virtual Switch   

415

Summary of Contents for QTS 4.5 Series
































































































































































































































































































































































































































































































































































































Reviews:

No comments