QNAP QTS 4.5 Series User Manual Download Page 83

Page: 83 / 575

Type

Option

Description

User Action

Guest access
rights

Deny Access

Selecting this option
denies access to
guest accounts.

N/A

Read only

Selecting this option
grants read-only
access to guest
accounts.

For details, see

Shared Folder Permissions

Click

Next

QTS mounts the ISO file as a shared folder and then adds it to the

Shared Folder

screen.

Click

Finish

Shared Folder Permissions

Permission

Description

Read Only (RO)

The user or user group can read files in the shared folder, but not
write them.

Read/Write (RW)

The user or user group can read and write files in the shared
folder.

Deny

The user or user group cannot read or write files in the shared
folder.

Editing Shared Folder Permissions

Go to

Control Panel

Privilege

Shared Folders

Shared Folder

Locate a shared folder.

Under

Action

, click

The

Edit Shared Folder Permission

window appears.

Under

Select permission type

, select a permission type to edit.

Perform any of the following tasks.

QTS 4.5.x User Guide

Privilege Settings

Summary of Contents for QTS 4.5 Series
































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for QTS 4.5 Series

Reviews:

Related manuals for QTS 4.5 Series

Brands by name

Popular brands

QNAP QTS 4.5 Series, User Manual

Search results

Summary of Contents for QTS 4.5 Series

Reviews:

Related manuals for QTS 4.5 Series

Brands by name

Popular brands