QNAP QTS 4.5 Series User Manual Download Page 202

Page: 202 / 575

Storage Pool Migration

Storage pool migration enables you to safely remove a storage pool and move it to another QNAP NAS. The
following data is retained:

• Files and folders

• Storage configuration

• Snapshots

Storage Pool Migration Requirements

The following requirements apply when migrating a storage pool to a new NAS.

• The two NAS devices must both be running QTS, or both be running QuTS hero. QTS to QuTS hero

migration is not possible.

• The version of QTS or QuTS hero running on the new NAS must be the same or newer than the

version running on the original NAS.

Migrating a Storage Pool to a New NAS

Go to

Storage & Snapshots

Storage

Storage/Snapshots

Select a storage pool.

Click

Manage

The

Storage Pool Management

window opens.

Click

Action

, and then select

Safely Detach Pool

A confirmation message appears.

Click

Yes

The storage pool status changes to

Safely Detaching..

. After QTS has finished detaching the

pool, it disappears from Storage & Snapshots.

Remove the drives containing the storage pool from the NAS.

Install the drives in the new NAS.

On the new NAS, go to

Storage & Snapshots

Storage

Disks/VJBOD

Click

Recover

, and then select

Attach and Recover Storage Pool

A confirmation message appears.

10.

Optional: Enter the SED password.
You must enter this password if you were using self-encrypted drives (SEDs) with encryption enabled.

11.

Click

Attach

QTS scans the disks and detects the storage pool.

12.

Click

Apply

The storage pool appears in Storage & Snapshots on the new NAS.

QTS 4.5.x User Guide

Storage & Snapshots

201

Summary of Contents for QTS 4.5 Series
































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for QTS 4.5 Series

Reviews:

Related manuals for QTS 4.5 Series

Brands by name

Popular brands

QNAP QTS 4.5 Series, User Manual

Search results

Summary of Contents for QTS 4.5 Series

Reviews:

Related manuals for QTS 4.5 Series

Brands by name

Popular brands