Policy
Description
Specify a client-side encryption password
Encrypts data before sending it to the destination
This can reduce the risk of unauthorized data
access.
Warning
Client-side encryption cannot be
disabled, and the password cannot be
changed after encryption is applied.
1.
Click
Settings
.
The
Client-side encryption
window opens.
2.
Specify an encryption password.
3.
Acknowledge the warning.
4.
Click
OK
.
The
Client-side encryption
window closes.
Use TCP BBR congestion control
Optimizes transmission speeds allowing for higher
bandwidth and lower latency
Remove additional files in destination folder
Removes destination data that doesn't also exist in
the source folder
Changes to files in the source folder will be mirrored
in the destination folder.
Detect sparse files
Uploads only non-null data for sparse files
Check file contents
Examines file contents, data, size, and name to
determine if two files are identical
Note
Selecting this option may increase the
time & bandwidth used when syncing
data.
p
Exclude duplicate files
Examines file contents, data, size, and name to
determine if files are duplicates
Duplicate files are excluded from the job.
Exclude symbolic links
Exclude symbolic links located in the paired folder
Include hidden files and folders
Includes any hidden files and folders
Compress files during transmission
Compressing files can lower bandwidth requirements
This can speed up syncing over a slow data
connection, but consumes more CPU resources.
Exclude system-generated temp files
Excludes temporary files created by the system
Replicate ACL and extended attributes
Replicates information stored in extended attributes
The destination host must enable the same ACL
functions and be joined to the same domain.
Do not take a snapshot
Reads data directly from the disk instead of using a
snapshot as the backup source
QTS 4.5.x User Guide
Hybrid Backup Sync
372
