manualshive.com logo in svg

QNAP QTS 4.5 Series, User Manual, Page: 233 / 575

Share
Download
QNAP QTS 4.5 Series User Manual Download Page 233

5.

Select a firmware update method. 

Firmware Update Method

Description

Install the latest firmware version

Download and install the latest version of the device
firmware.

Note

You can only select this option if QTS
has checked online and found a newer
firmware version than the one currently
installed on the device.

Select a local firmware file

Update the firmware using a local firmware IMG file
on your computer. Click 

Browse

 to select the file.

Tip

You can download firmware updates at

https://download.qnap.com

.

6.

Click 

Update

. 

Warning

Do not power off or disconnect the RAID device unless prompted.

7.

Follow the instructions to install the firmware update. 
Depending on the model you may be asked to power off then power on the device, or disconnect then
reconnect the device.
QTS re-detects the device and displays a notification message.

8.

Wait for confirmation that the firmware update has finished.

9.

Go to 

Storage & Snapshots

 > 

Storage

 > 

Disks/VJBOD

 .

10.

Click 

Recover

, and then select 

Attach and Recover Storage Pool

.

Configuring a Spare Disk

1.

Open 

Storage & Snapshots

.

2.

Click 

External RAID Device

 and then select 

External RAID Management

. 

The 

External RAID Management

 window opens.

3.

Click 

Manage

, and then select 

Configure Spare Disk

. 

The 

Configure Spare Disk

 window opens.

4.

Select one or more free disks.

5.

Click 

Apply

.

The selected disks are assigned as spare disks for the RAID group on the external RAID device.

External RAID Device Health

RAID Enclosure Health

To view the status and heath of RAID enclosures connected to the NAS, go to 

Storage & Snapshots

 > 

Storage

 > 

Disks/VJBOD

 .

QTS 4.5.x User Guide

Storage & Snapshots   

232

Summary of Contents for QTS 4.5 Series
































































































































































































































































































































































































































































































































































































Reviews:

No comments