QNAP QTS 4.5 Series User Manual Download Page 45

Page: 45 / 575

Click

Apply

Wake-on-LAN (WOL)

You can power on the NAS remotely using the Wake-on-LAN (WOL) protocol in Qfinder. This feature is
enabled by default.

Important

If the power cable is disconnected when the NAS is powered off, WOL will not work until
the NAS has been manually powered on.

Enabling or Disabling Wake-on-LAN (WOL)

Go to

Control Panel

System

Power

Wake-on-LAN (WOL)

Select

Enable

Disable

Click

Apply

Power Recovery

This feature allows you to configure the power on and off status of the NAS after a power outage.

Configuring the Power Recovery Settings

Go to

Control Panel

System

Power

Power Recovery

Select a power recovery setting.

• Restore the previous NAS power state.

• Turn on the NAS automatically.

• Keep the NAS turned off.

Click

Apply

Power Schedule

This feature allows you to schedule automatic system power on, power off, and restarts at specified times.

Configuring the Power Schedule

Go to

Control Panel

System

Power

Power Schedule

Select

Enable schedule

Perform any of the following tasks.

QTS 4.5.x User Guide

System Settings

Summary of Contents for QTS 4.5 Series
































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for QTS 4.5 Series

Reviews:

Related manuals for QTS 4.5 Series

Brands by name

Popular brands

QNAP QTS 4.5 Series, User Manual

Search results

Summary of Contents for QTS 4.5 Series

Reviews:

Related manuals for QTS 4.5 Series

Brands by name

Popular brands