QNAP QTS 4.5 Series User Manual Download Page 68

Page: 68 / 575

Task

User Action

Edit account profile

Under

Action

, click

The

Edit Account Profile

window appears.

Edit the settings.
The

Edit Account Profile

window provides the following settings not

included in the

Create a User

window:

•

Description (optional)

: Specify a user description that contains a

maximum of 50 characters.

•

Disallow the user to change password

: When selected, QTS

prevents the user from changing the password.

•

Disable this account

: Select this option to disable the user

account. You can either select to disable the account

Now

specify an

Expiry Date

Modify the quota for the user.

Note

This option is only available when quotas are enabled.

•

No Limit

: Quota settings do not apply to the user.

•

Limit disk space to

: Specify a quota for the user.

•

Use group quotas

: Group quota settings apply to the user.

Important

Individual quotas may override group quotas.

Click

Edit user group membership

Under

Action

, click

The

Edit User's Groups

window appears.

Select or deselect user groups.

Click

Apply

Edit shared folder
permissions

Under

Action

, click

The

Edit Shared Folder Permission

window appears.

Edit the user's permissions for each shared folder.

Optional: Select

Apply changes to subfolders

Click

Apply

QTS 4.5.x User Guide

Privilege Settings

Summary of Contents for QTS 4.5 Series
































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for QTS 4.5 Series

Reviews:

Related manuals for QTS 4.5 Series

Brands by name

Popular brands

QNAP QTS 4.5 Series, User Manual

Search results

Summary of Contents for QTS 4.5 Series

Reviews:

Related manuals for QTS 4.5 Series

Brands by name

Popular brands