manualshive.com logo in svg

QNAP QTS 4.5 Series, User Manual, Page: 249 / 575

Share
Download
QNAP QTS 4.5 Series User Manual Download Page 249

8.

Click 

OK

. 

A confirmation message appears.

9.

Click 

OK

.

QTS takes the snapshot. The snapshot appears in 

Snapshot Manager

.

Configuring a Snapshot Schedule

Tip

You can configure a separate snapshot schedule for each volume and LUN.

1.

Go to 

Storage & Snapshots

 > 

Storage

 > 

Storage/Snapshots

 .

2.

Select a thick volume, thin volume, or block-based LUN.

3.

Click 

Snapshot

, and then select 

Snapshot Manager

. 

The 

Snapshot Manager

 window opens.

4.

Click 

Schedule Snapshot

. 

The 

Snapshot Settings

 window opens.

5.

Select 

Enable schedule

.

6.

Specify how often QTS will take a snapshot.

7.

Select the LUN snapshot type. 
This setting is only available when taking a snapshot of a block-based LUN.

Type

Description

Crash consistent

The snapshot records the state of the data on the
LUN.

Application consistent

The snapshot records the state of data and
applications on the LUN. The iSCSI host flushes
data in memory to the LUN before QTS takes a
snapshot. If VMware vCenter is using the LUN,
vCenter takes a virtual machine snapshot.

Important

This option is only available for VMware
vCenter, or for Volume Shadow Copy
Service (VSS) aware applications
running on a Windows server. You must
install QNAP Snapshot Agent on the
iSCSI initiator.

8.

Optional: Enable smart snapshots. 
When enabled, QTS only takes a snapshot if data on the volume or LUN was modified since the last
snapshot was taken.

9.

Optional: Specify a description. 
The description helps you to identify the snapshot.

10.

Click 

OK

. 

A confirmation message appears.

11.

Click 

OK

.

QTS 4.5.x User Guide

Storage & Snapshots   

248

Summary of Contents for QTS 4.5 Series
































































































































































































































































































































































































































































































































































































Reviews:

No comments