Raritan PMC-1000, Руководство пользователя

Страница: 61 / 621

Chapter 2: Connecting External Equipment (Optional)
49
For the cabling length restrictions, see
Supported Maximum DPX
Sensor Distances
(on page 52).
Warning: For proper operation, wait for 15-30 seconds between each
connection operation or each disconnection operation of
environmental sensor packages.
To directly connect a DPX with a factory-installed sensor cable:
An RJ-12 to RJ-45 adapter is required to connect a DPX sensor package
to the BCM2.
a. Connect the adapter's RJ-12 connector to the DPX sensor cable.
b. Connect the adapter's RJ-45 connector to the RJ-45 SENSOR
port of the BCM2.
To directly connect a differential air pressure sensor:
1. Connect a Raritan-provided phone cable to the IN port of a
differential air pressure sensor.
2. Get an RJ-12 to RJ-45 adapter. Connect the adapter's RJ-12
connector to the other end of the phone cable.
3. Connect this adapter's RJ-45 connector to the RJ-45 SENSOR port
on the BCM2.
4. If intended, connect one DPX sensor package to the OUT port of the
differential air pressure sensor. It can be any DPX sensor package,
such as a DPX-T3H1.
The BCM2 device
Raritan differential air pressure sensors
One DPX sensor package (optional)
RJ-12 to RJ-45 adapter