Raritan PMC-1000, Руководство пользователя

Страница: 294 / 621

Chapter 3: Using the Web Interface
282
Note: The SNMP notifications may be SNMP v2c or SNMP v3
traps/informs, depending on the settings for the System SNMP
Notification Action. See
Enabling and Configuring SNMP
(on page
345).
Then the SNMP notifications are sent when:

Any numeric sensor's reading enters the warning or critical
range.

Any sensor reading or state returns to normal.

Any sensor becomes unavailable.

The active energy sensor is reset.

Any state sensor changes its state.
For example, when the outlet 3's voltage exceeds the upper warning
threshold, the SNMP notifications are sent, and when the voltage
drops below the upper warning threshold, the SNMP notifications are
sent again.
Sample Inlet-Level Event Rule
In this example, we want the BCM2 to send SNMP notifications to the
SNMP manager for any sensor change event of the Inlet I1.
The event rule involves:
• Event: Inlet > Sensor > Any sub-event
•
Action: System SNMP Notification Action
To create the above event rule:
1. For an event at the inlet level, select "Inlet" in the Event field.
2. Select "Sensor" to refer to sensor-related events.