Raritan PMC-1000, Руководство пользователя

Страница: 406 / 621

Chapter 5: Using the Command Line Interface
394
config:# network ipv6 staticRoutes add <dest-1> interface <ETH>
Delete an existing static route:
config:# network ipv6 staticRoutes delete <route_ID>
Modify an existing static route:
config:# network ipv6 staticRoutes modify <route_ID> <dest-2> <hop>
-- OR --
config:# network ipv6 staticRoutes modify <route_ID> <dest-2> interface <ETH>
Variables:
• <dest-1> is the IP address and prefix length of the subnet where the
BCM2 belongs. The format is
IP address/prefix length.
•
<hop> is the IP address of the next hop router.
•
<ETH> is one of the interfaces:
ethernet, wireless and bridge. Type
"bridge" only when your BCM2 is in the bridging mode.
• <route_ID> is the ID number of the route setting which you want to
delete or modify.
• <dest-2> is a modified route setting that will replace the original
route setting. Its format is
IP address/prefix length. You can modify
either the IP address or the prefix length or both.