Raritan PMC-1000, Руководство пользователя

Страница: 57 / 621

Chapter 1: Installation and Initial Configuration
45
Number Description
Sensor or actuator name.
The following information is listed.

Serial number

Chain position, which involves the following information:
Port <N>: <N> is the number of the sensor port where this sensor or
actuator is connected. This number is always 1 for BCM2.
Chain Pos. <n>: <n> is the sensor or actuator's position in a sensor daisy
chain.
Note: Only DX, DPX2 and DPX3 sensor packages provide the chain
position information.

If this sensor or actuator is on a sensor package with multiple channels,
such as DX-D2C6, its channel number is indicated as "Channel x", where
x is a number.
Depending on the sensor type, any of the following information is displayed:

State of a state sensor: Normal or Alarmed.

State of an actuator: On or Off.

Reading of a numeric sensor.
X, Y, and Z coordinates which you specify for this sensor or actuator. See
Individual Sensor/Actuator Pages (on page 129).
To switch on or off an actuator:
1. Follow the above steps 1 to 3 to select an actuator.