Raritan PMC-1000, Руководство пользователя

Страница: 495 / 621

Chapter 5: Using the Command Line Interface
483
• <hy_value> is a numeric value that is assigned to the hysteresis for
the specified inlet pole sensor. See
"To De-assert" and Deassertion
Hysteresis
(on page 110).
•
<as_value> is a number in samples that is assigned to the assertion
timeout for the specified inlet pole sensor. See "To Assert" and
Assertion Timeout
(on page 108).
Commands for Overcurrent Protector Sensors
A sensor configuration command for overcurrent protectors begins with
sensor ocp.
You can configure various overcurrent protector threshold settings at a
time by combining multiple commands. See Multi-Command Syntax (on
page 504).
Set the Upper Critical threshold for an overcurrent protector:
config:# sensor ocp <n> <sensor type> upperCritical <option>
Set the Upper Warning threshold for an overcurrent protector:
config:# sensor ocp <n> <sensor type> upperWarning <option>
Set the Lower Critical threshold for an overcurrent protector:
config:# sensor ocp <n> <sensor type> lowerCritical <option>
Set the Lower Warning threshold for an overcurrent protector:
config:# sensor ocp <n> <sensor type> lowerWarning <option>
Set the deassertion hysteresis for an overcurrent protector:
config:# sensor ocp <n> <sensor type> hysteresis <hy_value>
Set the assertion timeout for an overcurrent protector: