Raritan PMC-1000, Руководство пользователя

Страница: 296 / 621

Chapter 3: Using the Web Interface
284
Sample Environmental-Sensor-Level Event Rule
This section applies to outlet-switching capable models only.
In this example, we want BCM2 to activate the load shedding function
when a contact closure sensor enters the alarmed state. This event rule
requires creating a new action before creating the rule.
Step 1: create a new action for activating the load shedding
1. Choose Device Settings > Event Rules > .
2. In this illustration, assign the name "Activate Load Shedding" to the
new action.
3. In the Action field, select "Change load shedding state."
4. In the Operation field, select Start Load Shedding.
5. Click Create to finish the creation.
After the new action is created, follow the procedure below to create an
event rule that triggers the load shedding mode when the contact
closure sensor enters the alarmed state. This event rule involves the
following:
• Event: Peripheral Device Slot > Slot 1 > State Sensor/Actuator >
Alarmed/Open/On
•
Trigger condition: Alarmed
•
Action: Activate Load Shedding
Step 2: create the contact closure-triggered load shedding event
rule
1. Click on the Event Rules page.