Raritan PMC-1000, Руководство пользователя

Страница: 298 / 621

Chapter 3: Using the Web Interface
286
A Note about Infinite Loop
You should avoid building an infinite loop when creating event rules.
The infinite loop refers to a condition where the BCM2 keeps busy
because the action or one of the actions taken for a certain event
triggers an identical or similar event which will result in an action
triggering one more event.
Example 1
This example illustrates an event rule which continuously causes the
BCM2 to send out email messages.
Event selected Action included
Device > Sending SMTP message failed Send email
Example 2
This example illustrates an event rule which continuously causes the
BCM2 to send out SMTP messages when one of the selected events
listed on the Device menu occurs. Note that <Any sub-event> under the
Device menu includes the event "Sending SMTP message failed."
Event selected Action included
Device > Any sub-event Send email
Example 3
This example illustrates a situation where two event rules combined
regarding the outlet state changes causes the BCM2 to continuously
power cycle outlets 1 and 2 in turn.
Event selected Action included
Outlet > Outlet 1 > Sensor > Outlet
State > On/Off > Both (trigger condition)
Cycle Outlet 2
(Switch outlets --> Cycle Outlet -->
Outlet 2)
Outlet > Outlet 2 > Sensor > Outlet
State > On/Off > Both (trigger condition)
Cycle Outlet 1
(Switch outlets --> Cycle Outlet -->
Outlet 1)