Raritan PMC-1000 Скачать руководство пользователя страница 335

Страница: 335 / 621

Chapter 3: Using the Web Interface

323

Option

Description

Built In

The setting will follow the same setting in Raritan's built-in

profile.



If "Excluded" is selected in the built-in profile, this setting

will be also excluded.



If "Included" is selected in the built-in profile, this setting

will be also included.

The option inherited from the built-in profile will be enclosed
in parentheses.

Note: The option "Built In" is available in those settings

whose corresponding settings in the built in profile have

been set to a non-inherited option -- Excluded or Included.

Click Save.

Repeat the same steps if you want to create more bulk profiles.

Performing Bulk Configuration

On the source device, make sure the wanted profile has been selected as

the default one. If not, start from step 1 below. If yes, go to step 2

directly.

Step 1: Select the desired bulk configuration profile (optional)

Choose Maintenance > Bulk Configuration.

Click on the row of the wanted profile to open the Edit Bulk Profile

page.

Select the "Select as default profile" checkbox.

Click Save.

Содержание PMC-1000













































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PMC-1000

Отзывы:

Похожие инструкции для PMC-1000

Бренды по названию

Популярные бренды

Raritan PMC-1000, Руководство пользователя

Результаты поиска

Содержание PMC-1000

Отзывы:

Похожие инструкции для PMC-1000

Бренды по названию

Популярные бренды