Raritan PMC-1000, Руководство пользователя

Страница: 481 / 621

Chapter 5: Using the Command Line Interface
469
config:# authentication radius modify <server_num> retries <retries>
Change the shared secret:
config:# authentication radius modify <server_num> secret
Change the priority of the specified server:
config:# authentication radius modify <server_num> sortPositon <position>
Tip: You can add more than one parameters to the command. For
example, "
authentication radius modify <server_num>
host
<host>
authType <rds_type>
authPort <auth_port>
accountPort
<acct_port>
...".
Variables:
• <server_num> is the sequential number of the specified server in the
Radius server list.
•
<host> is the new IP address or host name of the Radius server.
•
<rds_type> is one of the Radius authentication types:
pap, chap,
msChapV2.
•
<auth_port> is the new authentication port number.
• <acct_port> is the new accounting port number.
• <timeout> is the new timeout value in seconds. It ranges between 1
to 10 seconds.
•
<retries> is the new number of retries. It ranges between 0 to 5.
To enter the shared secret:
1. After executing the above Radius command, the system
automatically prompts you to enter the shared secret.
2. Type the secret and press Enter.
3. Re-type the same secret and press Enter.
Example:
config:# authentication radius add 192.168.7.99 chap 1812 1813 10 3