SD710 Series Servo Drive User's Manual Chapter 7 Auxiliary Functions
37
assist
meri
torious
d
eed
or
service
capab
le
8
Press the "DATA/SHIFT" key for about 1 second to return
to the Fn203 state.
CAUTION
●
When satisfactory response characteristics cannot be obtained by intelligent tuning or command
input type intelligent tuning, use single parameter tuning.
●
Vibration or overshoot may occur during adjustment. To ensure safety, perform in a state where
an emergency stop is always possible this feature.
● If you want to further fine
-tune each servo gain after single-parameter tuning, perform manual
tuning.
● Depending on the selected adjustment mode, the one
-touch tuning operation proceeds as follows.
①
When Tuning Mode = 0 or 1, the model tracking control is "disabled" and adjustments other than
for positioning purposes are made.
②
When Tuning Mode = 2 or 3, the model tracking control is "active" and positioning-specific
adjustments are made.
MODE/SET
Data/
！
