SD710 Series Servo Drive User Manual Appendix
7
Setting value: 0x27
Symbol
Home position return enabled
Trigger
method
Control
mode
ORGEN
When the terminal triggers home position return in position mode, the
home position return command is read into the controller.
high and low
levels
edge trigger
□
P
Setting value: 0x28
Symbol
Mechanical home position signal
Trigger
method
Control
mode
ORGS
This signal is used as the home position signal source during the
home position return.
Invalid: home position signal not touched.
Valid: The home position signal is touched.
Rising edge
□
P
