SD710 Series Servo Drive User Manual Chapter 1 Safety Precautions
3
Whether the product arrives
in the same model as the
one you ordered
The box contains a simple user's manual and SD710 Servo Drive you ordered. Please
check by the nameplate model of servo motor and servo drive.
Whether the product is
damaged
Please check the appearance of the whole machine and whether the product has been
damaged during transportation. If you find some kind of omission or damage, please
contact our company or your supplier immediately.
Whether the servo motor
rotary axis runs smoothly
It is normal if it can be turned gently by hand. Except for servo motor with holding brake.
1.3 Handling and Storage Precautions
Attention
⚫
Do not store or place in the following environment, otherwise it may lead to fire, electric shock or machine
damage.
⚫
In places exposed to direct sunlight, places where the ambient temperature exceeds the storage temperature,
places where the relative humidity exceeds the storage humidity, places where there is a large temperature difference
or condensation, places near corrosive gases or flammable gases, places where there is a lot of dust, dirt, salt and
metal dust, places where water, oil and medicine drip, places where vibration or shock can be transmitted to the main
body, do not hold the cable or Motor shaft for handling, otherwise it may cause injury or malfunction.
⚫
Do not stack the product too much during handling or storage, as this may cause injury or malfunction
1.4 Precautions for Installation
Attention
⚫
Do not install this product in places where water can be splashed or in environments where corrosion is likely to
occur.
⚫
Do not use this product near flammable gases and combustible materials, as there is a risk of electric shock or
fire.
⚫
Do not sit on the product or place heavy objects on it, as this may result in injury.
⚫
Please install the product in a cabinet that provides fire protection and electrical protection, otherwise it may
cause a fire.
⚫
Do not block the suction and exhaust ports or allow foreign objects to enter the product, as this may lead to
malfunction and fire due to the aging of the internal components.
⚫
Be sure to comply with the installation orientation requirements, as failure may result in malfunction.
⚫
When setting up, make sure to keep the specified separation distance between the servo driver and the inner
surface of the electric cabinet and other machines, otherwise it may lead to fire or malfunction.
⚫
Do not apply excessive shocks as they may cause malfunction.
！
！
