Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 76 / 796

R&S FSP Instrument Functions
Introduction
4.4 Operating Manual 1164.4556.12 - 06
4.1 Introduction
All functions of the R&S FSP and their application are explained in detail in this
chapter. The sequence of the described menu groups depends on the procedure
selected for the configuration and start of a measurement:
1. Resetting the instrument
– “R&S FSP Initial Configuration – PRESET Key” on page 4.5
2. Setting the mode
– “Mode Selection – Hotkey Bar” on page 4.7
– “Return to Manual Operation – LOCAL Menu” on page 4.8
3. Setting the measurement parameters in analyzer mode
– “Analyzer Mode” on page 4.9
4. Basic functions for general settings, printout and data management
– “Setup of Limit Lines and Display Lines – LINES Key” on page 4.146
– “Configuration of Screen Display – DISP Key” on page 4.157
– “Instrument Setup and Interface Configuration – SETUP Key” on page 4.163
– “Saving and Recalling Data Sets – FILE Key” on page 4.193
– “Measurement Documentation – HCOPY Key” on page 4.202
5. Additional and optional functions
– “Tracking Generator – Option R&S FSP-B9” on page 4.212
– “External Generator Control – Option R&S FSP-B10” on page 4.226
– “LAN Interface - Option R&S FSP-B16” on page 4.245
– “LO/IF ports for external mixers - Option R&S FSP-B21” on page 4.265
– “An essential performance criterion to be met by automatic test systems is to
minimize the time overhead of the entire test relative to the net measurement
time. A typical test comprises the following steps:” on page 4.288
The operating concept is described in the Quick Start Guide, chapter 4, “Basic Oper-
ation”.
The remote commands (if any) are indicated for each softkey. A detailed description
of the associated remote commands is given in chapter
“Remote Control – Descrip-
tion of Commands” .