Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 545 / 796

Operating Manual 1164.4556.12 - 06 6.151
R&S FSP Remote Control – Description of Commands
SENSe Subsystem
[SENSe<1|2>:]CORRection:CVL:DATA <freq>,<level>..
This command defines the reference values of the selected Conversion Loss Tables. The values are
entered as a result of frequency/level pairs. The frequencies have to be sent in ascending order. A
maximum of 50 pairs of frequency/level may be entered. Prior to this command, the command
SENS:
CORR:CVL:SEL
must be sent.
Example:
"CORR:CVL:SEL 'LOSS_TAB'"
"CORR:CVL:DATA 1MHZ,-30DB,2MHZ,-40DB"
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is only available with the option R&S FSP-B21 (model R&S FSP 40 only).
[SENSe<1|2>:]CORRection:CVL:HARMonic <numeric_value>
This command defines the used mixer harmonic in the Conversion Loss Table. Prior to this command,
the command
SENS:CORR:CVL:SEL
must be sent.
Example:
"CORR:CVL:SEL 'LOSS_TAB'"
"CORR:CVL:HARM 4"
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is only available with the option R&S FSP-B21 (modell R&S FSP 40 only).
[SENSe<1|2>:]CORRection:CVL:MIXer <string>
This command defines the type designation of the mixer in the Conversion Loss Table. Prior to this
command, the command
SENS:CORR:CVL:SEL
must be sent.
Parameter: <string>::= Type designation of mixer with a maximum of 16 characters
Example:
"CORR:CVL:SEL 'LOSS_TAB'"
"CORR:CVL:MIX 'FS_Z60'"
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is only available with the option R&S FSP-B21 (modell R&S FSP 40 only).
[SENSe<1|2>:]CORRection:CVL:PORTs 2 | 3
This command defines the type of mixer in the Conversion Loss Table. Prior to this command, the
command
SENS:CORR:CVL:SEL
must be sent.
Example:
"CORR:CVL:SEL 'LOSS_TAB'"
"CORR:CVL:PORT 3"
Characteristics: *RST value: -
SCPI: device-specific
Mode: A