Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 404 / 796

R&S FSP Remote Control – Description of Commands
Common Commands
6.10 Operating Manual 1164.4556.12 - 06
Example:
B3,B4,B2,B6,0,0,B9,B10,0,0,0,0,B15,0,0,0,0,0,B21,0,0,0,B25,K74,0,K76,0,0,0,K5,K77,K7,K8,K9,K7
2,K73,0,K82,K83,K84,K85,0,0,0,0,B70,0,0,0,0,0,0,0,0,0,0,0
*PCB 0 to 30
PASS CONTROL BACK indicates the controller address which the GPIB control is to be returned to
after termination of the triggered action.
*PRE 0 to 255
PARALLEL POLL REGISTER ENABLE sets the parallel poll enable register to the indicated value.
The query form *PRE? returns the contents of the parallel poll enable register in decimal form.
*PSC 0 | 1
POWER ON STATUS CLEAR determines whether the contents of the ENABle registers are preserved
or reset during power-up.
26 R&S FS-K76 TD SCDMA BTS
27 reserved
28 R&S FS-K30 Noise Figure and Gain Measurments
29 R&S FS-K40 Phase Noise Tests
30 R&S FS-K5 GSM-GSM/EDGE
31 R&S FS-K77 TD SCDMA UE
32 R&S FS-K7 FM Demodulator
33 R&S FS-K8 Application Firmware Bluetooth® Transmitter measurement
34 R&S FS-K9 Power sensor measurements
35 R&S FS-K72 WCDMA 3G FDD BTS
36 R&S FS-K73 WCDMA 3G FDD UE
37 reserved
38 R&S FS-K82 CDMA2000 Downlink
39 R&S FS-K83 CDMA2000 Uplink
40 R&S FS-K84 1xEV-DO Downlink
41 R&S FS-K85 1xEV-DOUpnlink
42 R&S FS-K86 1xEV-DV Downlink
43 R&S FSP-K90 W-Lan 802.11a
44 to 45 reserved
46 R&S FSP-B70 FSP Demodulator for WCDMA BTS measurements
47 to 51 reserved
*PSC = 0 causes the contents of the status registers to be preserved. Thus
a service request can be generated when switching on the instru-
ment, if the status registers ESE and SRE are suitably configured.
*PSC <> 0 Resets the registers.
Position Option