manualshive.com logo in svg

Rohde & Schwarz R&S FSP Series, Operating Manual

Share
Download
Rohde & Schwarz R&S FSP Series Operating Manual Download Page 265

Operating Manual 1164.4556.12 - 06

4.193

R&S FSP

Instrument Functions

Basic Settings

Remote command:

SYST:APPL:SREC ON

OPEN START 
MENU

The 

OPEN START MENU

 softkey opens the windows XP start menu and therefore

provides an easy access to standard windows functions if a mouse is connect.

POWER 
METER

The 

POWER METER

 softkey opens a submenu for measurements with power sen-

sors. For details refer to the Software Manual of the application firmware R&S FS-
K9 on the options CD-ROM.

4.6.4

Saving and Recalling Data Sets – FILE Key 

4.6.4.1

Overview

The 

FILE

 key calls the following functions:

• Storage/loading functions for storing (

SAVE

) instrument settings such as 

instrument configurations (measurement/display settings, etc.) and measurement 
results from working memory to permanent storage media, or to load (

RECALL

) 

stored data into working memory. 

• Functions for management of storage media (

FILE MANAGER

). Included are 

among others functions for listing files, formatting storage media, copying, and 
deleting/renaming files.

The R&S FSP is capable of internally storing complete instrument settings with
instrument configurations and measurement data in the form of data sets. The
respective data are stored on the internal hard disk or, if selected, on a memory stick
or on a floppy. The hard disk and floppy disk drives have the following names:

floppy disk A:, hard disk D:

FILE

It is possible to load data sets stored with another instrument of the same analyzer
family. However, keep the following restrictions in mind:

• The frequency range of the loading instrument must include the range of the 

instrument used to store the data set.

Example: A R&S FSP40 can load a data set, saved with a R&S FSP26 but a 
R&S FSP8 can not load a data set saved with a R&S FSP26. A R&S FSP with 
a frequency range of at least 26 GHz is required.

• An instrument with an additional option can load a data set saved with an 

instrument without this option, but not the other way round.

Example: A FSQ 8 with option R&S FSP-B17 can load a data set, saved with a 
R&S FSP8 without this option but not the other way round.

SAVE | RECALL

!

SAVE FILE

RECALL FILE

SELECT PATH

SELECT FILE

EDIT FILE NAME

Summary of Contents for R&S FSP Series





























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands